Product ID:7800 SHIELDED METAL ARC WELDING (SMAW)
MSDS Date:01/01/1987
FSC:3439
NIIN:00F026426
MSDS Number: BQJFH

TRI-MARK INC

8585 INDUSTRY PARK DR
PIQUA, OH 45356
US

Emergency Phone: 513-773-2010

Info Phone: 513-773-2010

Cage: 1X069

TRI-MARK INC

PIQUA, OH 45356-9511 US

Telephone: 800-543-8934

Cage: 1X069

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 5 MG/CUM

MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

FLUORSPAR *92-4*

CAS: 14542-23-5

OSHA PEL 2.5 MG/CUM (AS F)

ACGIH TLV: 2.5 MG/CUM (AS F)

POTASSIUM SILICATE, POTASSIUM METASILICATE *92-4*

CAS: 1312-76-1

SILICATE BINDERS (SODIUM SILICATE) *92-4*

CAS: 1344-09-8

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: FUMES & GASES CAN BE
DANGEROUS TO YOUR HEALTH. WELDING FUMES MAY RESULT IN DISCOMFORT,
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF NOSE, THROAT & EYES.
ARC RAYS CAN INJURE EYES & BURN SKIN . ELECTRIC SHOCK CAN KILL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: SIDEROSIS (IRON DEPOSITS IN LUNGS).

First Aid:EYES/SKIN/INHALATION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NON-FLAMMABLE
Fire Fighting Procedures:WELDING ARC & SPARKS CAN IGNITE COMBUSTIBLES.

Spill Release Procedures:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.

Handling and Storage Precautions:READ & UNDERSTAND MANUFACTURER'S
INSTRUCTIONS & PRECAUTIONARY LABEL ON PRODUCT. WELDING FUMES &
GASES CANNOT BE CLASSIFIED SIMPLY.
Other Precautions:THE COMPOSITION & QUANTITY OF BOTH ARE DEPENDENT UPON
THE METAL BEING WELDED, THE PROCESS, PROCEDURES, & ELECTRODES USED.
OTHER CONDITIONS WHICH ALSO INFLUENCE COMPOSITION & QUANTITY
INCLUDE COATINGS ON THE METAL BEING WELDED. SEE SUPP.

Respiratory Protection:USE NISOH APPROVED OR EQUIVALENT FUME RESPIRATOR
OR AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:ENOUGH LOCAL EXHAUST AT THE ARC, OR BOTH, TO KEEP
FUMES/GASES BELOW TLV'S. TRAIN WELDER TO KEEP HIS HEAD OUT OF
FUMES.
Protective Gloves:WELDER'S
Eye Protection:HELMET OR FACE SHIELD W/FILTER LENS
Other Protective Equipment:SHADE NO 14, PROTECTIVE SCREENS, FLASH
GOGGLES, ARM PROTECTORS, APRONS, HATS, SHOULDER PROTECTION, DARK
CLOTHING
Supplemental Safety and Health
PRECAUTIONS CON'T: SUCH AS PAINT, PLATING OR GALVANIZING, NUMBER OF
WELDERS & VOLUME OF WORK AREA, QUALITY & AMOUNT OF VENTILATION,
POSITION OF WELDER'S HEAD W/RESPECT TO FUME PLUME, AS WELL AS THE
PR ESENCE OF CONTAMINANTS IN THE ATMOSPHERE SUCH AS CHLORINATED
HYDROCARBON VAPORS FROM CLEANING/DEGREASING ACTIVITIES.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, OZONE & NITROGEN OXIDES MAY
BE FORMED BY ARC RADIATION, & PRODUCTS FROM THE INGREDIENTS.

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
CONTAINER OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.